SINO INDUSTRY SECTION

Bearings

Bearing types, load ratings, lubrication and failure analysis for rotating equipment.

How to Choose a Locating and Floating Bearing Arrangement

Select a locating and floating bearing arrangement by tracing axial loads, thermal growth, ring retention, fits, and available movement.

28 October 2026By Sino Industry Editorial Team

Illustration of a rolling bearing with its internal radial clearance being measured.

Bearings

When Should You Specify C3 Bearing Internal Clearance?

Specify C3 bearing clearance only when fits, temperature differences, or mounting conditions would reduce normal clearance too far in service.

27 October 2026By Sino Industry Editorial Team

Illustration of grease being applied to an industrial bearing

Bearings

How to Choose Grease for an Industrial Bearing

Select industrial bearing grease by load, speed, temperature, contamination, sealing and relubrication method—not NLGI grade alone.

23 October 2026By Sino Industry Editorial Team

Rolling bearing lubrication comparison for choosing between grease and oil

Bearings

Bearing Grease vs Oil: How to Choose Lubrication for Rolling Bearings

Choose grease or oil for rolling bearings by comparing speed, heat, contamination, sealing, maintenance access, and system design.

6 October 2026By Sino Industry Editorial Team

Illustration of a bearing fitted between a rotating shaft and a housing.

Bearings

How to Select Bearing Fits for Rotating Shafts and Housings

Select shaft and housing bearing fits by evaluating ring load, temperature, materials, accuracy, axial movement, and safe assembly method.

4 October 2026By Sino Industry Editorial Team

Industrial bearing inspection showing surface damage on a rolling bearing

Bearings

How to Identify Bearing Failure Types from Noise, Heat, Vibration, and Surface Damage

Learn how to distinguish common bearing failure types from operating symptoms and surface evidence without mistaking screening clues for a confirmed diagnosis.

20 September 2026By Sino Industry Editorial Team

Diagram of a bearing fitted between a shaft and housing.

Bearings

How to Select a Bearing Fit: Shaft and Housing Tolerances for Load, Temperature, and Mounting

Select bearing shaft and housing fits by load direction, temperature, support stiffness, internal clearance, and mounting constraints.

15 September 2026By Sino Industry Editorial Team

Ball, cylindrical, tapered and spherical rolling elements arranged as a bearing family diagram

Bearings

Types of Industrial Bearings Explained

Understand ball, roller, needle, thrust, plain and mounted bearings by load direction, speed, alignment and environment.

13 August 2026By Sino Industry Editorial Team

Ball and cylindrical roller contact patterns compared between bearing raceways

Bearings

Ball Bearing vs Roller Bearing

Compare point and line contact in ball and roller bearings for load capacity, speed, stiffness, friction and misalignment.

23 July 2026By Sino Industry Editorial Team

Bearing raceway surrounded by lubrication, contamination, heat and misalignment warning symbols

Bearings

Common Bearing Failure Causes

Recognise lubrication, contamination, fit, alignment, electrical and handling problems before replacing a failed bearing.

18 June 2026By Sino Industry Editorial Team